How to Use An Orbital Sander to Remove Paint

How to Use An Orbital Sander to Remove Paint

Life needs changes. After continuing for years living in one place or following the same types of things all around, boredom certainly enters your mind as well as your body. In this situation, the thought that definitely comes to you- let’s change everything. It means, either you’re going to change the place or you’ll be going to renovate the whole scenario around you. No doubt both of the things are challenging as it requires a lot of effort to make them possible. Especially when it comes to removing the older, choppy, and damaged paint from the walls or any other surfaces, you have to struggle to find the right way so that the base of the walls and the furniture remains in proper state.

Thanks for having an orbital sander that really gives you the kind of performance to solve the purpose like a professional and you’ll be glad to see the existing paints are gone without damaging the base. Now you need to know how to use an orbital sander to remove paint. Check it out.

Removing Paint with Orbital Sander

If you get a chance to ask someone who has prior experience, he or she will certainly tell you how tiring and troublesome removing the existing paint perfectly from any surface without taking support from anywhere. Here comes a power tool that is called orbital sander for your rescue. Equipped with a round rotating sandpaper pad it works quite efficiently to remove paint from any surface be it walls or wooden furniture. From heavy-grit to fine-grain you can fix any sandpaper as per your requirement as the tool can attach changeable sand discs with its pad. 

Taking Safety Measure

While you’re working with this tool you have to take some protection for your eyes and lungs as it tends to release a good amount of dust. Therefore, before you go to begin the process, you must put on goggles, a dust mask and even gloves are quite compulsory for your safety.

Checking and Testing

Although an orbital sander is good for removing paint, there are some issues where using a sander would not be a better idea. For instance, if you find lead in the existing paint on the exterior walls, then you should drop the idea of using a sander; instead, you can apply a chemical stripper to get the best result.

Deciding The Purpose

There are two things that must go for your consideration. Both you want to remove paint from the surface with a single coat of paint remains, and then you should think of using an orbital sander as it can give a smooth and paint-free surface. But in some cases, it is seen that the surface has multiple layers of paints of different colors. Then instead of engaging an orbital sander for this purpose, you may take some chemicals that work as a paint remover that can remove paints from the surface to make it smooth enough.

Preparing The Surface

Before starting your orbital sander you have to remove dirt from the surface. That would not a matter of wiping out as it is stick to the surface for a quite long time. Instead, you have to apply any kind of cleaner or detergent that can remove dirt from the surface neatly. Once the dirt is gone leave the surface for an hour or two to dry.

Beginning The Sanding Process

Now let the process begin. At first, fix sandpaper of 60 grit with the pad and then start the machine. At once the disc starts rotating; place it on the surface and then holding with your hands and slowly move the machine gradually from one spot to another on the surface and continue the process for some while till enough dust produces through this. Take a clean cloth and wipe the surface to see the result.

Next, change the disc and add another sandpaper of 80 grit and start sanding the surface once again. You should go on with the process until you find all the existing paint is removed completely.

Finally, you have to fix fine-grain sandpaper of anything from 150 to 200 grit following the condition of the surface. This is to make the surface smooth enough so that you can start to apply fresh painting. If you have a metal piece then besides sandpaper you should rub the surface with steel wool to get the desired finish.

You can check: Orbital Sander Review

Inspecting The Condition

After the sanding is done, the dust should be cleaned up by wiping the surface. Now you have to check the surface to see the condition. If you find cracks, openings, or damage you have to apply wood putty to fill them before moving on to the next step. 

Avoiding Some Mistakes

Since the process is not too tough to be followed, still some of the mistakes are commonly done by many of you. That should be avoided for a better result and the well-being of the tool. Such as-

  1. Do not put too much pressure on the orbital sander as it may create dent or scratches on the surface. Besides, it also risks raising the temperature that could damage both the surface and the tool as well. You only need to hold the tool lightly on the surface.
  2. Change the grit of sandpaper sequentially to get the best finish. If you go from 80 grit to 220 grit directly then you cannot get the fine finish.
  3. Too quick sanding sometimes leaves swirl marks on the surface. Instead, control the speed of the sander to get a smooth finish. 
  4. The piece that you’re going to work on should be held in a place for the best finish. If the piece is moving it is impossible to get the best result.
  5. Don’t allow the wood dust to clog the sander as it could damage both the finishing of the surface and tool due to over-heating for this reason. Take a wire brush and comb lightly through the sandpaper or a rubber stick should be taken to clean the sandpaper.

So now you’ve got enough to handle the tool and the project very well. Now it’s time to deliver, go and perform the way like a professional to prove your worth.

Leave a Comment